- Field Supplies
- Agriculture
- Air
- Soil
- Water
- Weather
- Pollution Control
- Datalogging Telemetry and Control
- Laboratory Equipment
PS98i Pressure Transmitter
INW’s patented PS98i submersible pressure transmitter represents the latest in state-of-the-art level measurement technology. Building on years of successful experience, this industry standard two-wire, 4-20 mA device offers improved noise immunity, thermal performance and transient protection. In addition to reverse polarity protection, under-current and over-current limitation is featured on the transmitter channel.
INW's PS98i 4-20mA Submersible Pressure Transmitter
FEATURES
. Pressure, temperature
. Optional temperature channel
. Industry standard, 2-wire, 4-20 mA configuration
. Absolute, gauge, or sealed gauge
. ± 0.1% FSO typical accuracy
. Low power (9 - 24 VDC)
. Small diameter
. 316 SS, Viton, Teflon construction (titanium optional)
. Titanium and 0.75. diameter versions available
. Available with a variety of cable options - polyethylene,polyurethane, or FEP Teflon
. Reverse polarity protection
. Under- and over- current limitation
. Built-in transient protection
. 1/4. NPT end cone adapter option
. Optional lightning protection available
. Calibrated with patented calibration procedures and NIST traceable equipment
The updated cable harness design reduces the probability of leakage and protects the cable jacket from damage by providing double-sealing; 316 stainless steel, Viton® and Teflon® construction increases corrosion resistance. The transmitter’s standard end cone is a 1/4” NPT inlet which allows for increased application use, easy hookup and field calibration. The modular-designed PS98i may be easily factory serviced and repaired.
Specifications
Body Material 316 stainless steel
Wire Seal Materials Viton® and Teflon® Terminating Connector Available
Desiccant High- and standard capacity packs available
Weight .75 lbs.
Transmitter Voltage 9-24 VDC 100 ms warmup
Static Accuracy ±0.25% FSO (maximum)
(B.F.S.L. 25° C)* ±0.1% FSO (typical) 0.1% available on request.
Thermal Error ±2.0% FSO (maximum) (0-50° C, reference 25° C) ±0.8% FSO (typical)
Maximum ±0.5% FSO Zero Offset at 25° C
Sensitivity Accuracy ±0.25% FSO (maximum) at 25° C ±0.125% FSO (typical)
Over Range 2x (except 300 PSIA) Protection
Compensated 0 - 50° C Temperature Range
Operating -5° C to 70° C Temperature Range
CABLE
OD 0.28 maximum
Break Strength 138 lbs.
Maximum Length 2000 feet
Weight 4 lbs. per 100 feet
Ordering Information
PS98i SUBMERSIBLE PRESSURE TRANSMITTER RANGES
Absolute (Non vented)
3C263 30 PSIA
3C265 50 PSIA
3C267 100 PSIA
3C268 300 PSIA
Gauged (Vented to atmosphere)
3C344 1 PSIG
3C345 2.5 PSIG
3C260 5 PSIG
3C261 15 PSIG
3C262 30 PSIG
3C264 50 PSIG
3C266 100 PSIG
3C269 300 PSIG
PS98i CABLE OPTIONS
6E540 Vented PU INW Cable
6E543 Vented FEP INW Cable
6E542 Vented HDPE INW Cable
PS98i MISCELLANEOUS OPTIONS
6E405 End Cone (replaces ¼ ” FN P T adapter)
