Wilden Pro-Flo V Pump
Wilden's revolutionary Advanced™ Series pumps were specifically designed for maximum performance and efficiency. The bolted configuration of these pumps ensures total product containment while the redesigned liquid path reduces internal friction to maximize output and efficiency. A variety of elastomer options including Teflon® PTFE are available to meet abrasion, temperature, and chemical compatibility concerns. The Advanced™ Series plastic pumps are offered in polypropylene, PVDF and Teflon® PFA. A variety of options such as ANSI and DIN flanges and specialized air distribution systems are available to meet your specific application requirements.
Pro-Flo V™ Advanced™ Plastic Pumps
The Pro-Flo V" patent-pending air distribution system greatly improves the performance characteristics of air-operated, double-diaphragm pumps. This air distribution system incorporates three moving parts: The unbalanced air valve spool, the pilot spool, and the main shaft/diaphragm assembly. The air valve spool location directs pressurized air to one air chamber while exhausting the other. The pressurized air chamber causes the main shaft/diaphragm assembly to move outward discharging liquid on that side and pulling liquid in on the other side. When the shaft reaches the end of its stroke, the opposite inner piston actuates the pilot spool. The pilot spool location either pressurizes or exhausts the large end of the unbalanced air valve spool. When the large end is pressurized, the piston is forced up so that the air supply is routed through the air valve spool to the right side of the pump. When the large end is exhausted, the piston is forced down so that the air supply is routed through the air valve spool to the left side of the pump.
Wilden PV400 - 38 mm (1 1/2") Advanced Plastic Pump
FLOW RATE TO 463 LPM (122 GPM)
MAX PRESSURE = 8.6 BAR (125 PSI)
WETTED HOUSINGS
(Water Chambers and Manifolds)
Polyproylene
PVDF
NON-WETTED HOUSINGS
Center Block Aluminum PTFE Coated Nickel Plated
Air Chambers Polypropylenetd
Air Valve Aluminum PTFE Coated Nickel Plated
MAXIMUM SUCTION LIFT CAPABILITY
Dry 5.0 m (16.5")
MAXIMUM DIAMETER SOLIDS
6.4 mm (1/4")
Wilden PV800 - 51 mm (2") Advanced Plastic Pump
FLOW RATE TO 702 LPM (186 GPM)
MAX PRESSURE = 8.6 BAR (125 PSI)
WETTED HOUSINGS
(Water Chambers and Manifolds)
Material
Polypropylene
PVDF
NON-WETTED HOUSINGS
Center Block: Aluminum PTFE Coated Nickel Plated
Air Valve: Aluminum PTFE Coated Nickel Plated
Air Chambers: Aluminum PTFE Coated Nickel Plated
MAXIMUM SUCTION LIFT CAPABILITY
Dry 6.2 m (20.4')
MAXIMUM DIAMETER SOLIDS 6.4 mm (1/4")
Ordering Information
Please read manuals for complete ordering information.
PV400 - 38 mm (1 1/2") Advanced Plastic Pump
PV800 - 51 mm (2") Advanced Plastic Pump
Use the request button on product pages to build a quote request list.
| 0 Items | $0.00 |
Freephone
- Australia
- 1800 622 343
- New Zealand
- 0800 623 336