Envco – Environmental Equipment

The WS700 composite/discrete water sampler's state of the art water sampler controller gives you complete control over your water sampling process. With the water sample size control, you can take individual time-weighted composite samples or full-bottle discrete grab samples in a 2 gallon sample bottle. The water sample interval control allows you set the time between individual composite samples or enable the external trigger mode for flow proportional sampling. A start delay timer allows you to start multiple composite/discrete water samplers in the field at the same time, or to delay drawing a water sample after a triggering event so that your water sample better represents the water source. An automatic 15 second backflush cycle clears any debris from the strainer and empties the water from the hose so the next composite sample is not contaminated.The WS700 composite/discrete water samplers are easy to set up in the field. The composite/discrete water samplers rugged rainproof enclosure can be padlocked and/or chained to prevent tampering. The composite/discrete water samplers are enclosed in a relatively small case that can be easily hidden or camouflaged to prevent vandalism. The composite/discrete water sampler's is lightweight enough that even with a full sample bottle it can be suspended in a manhole for wastewater or stormwater sampling.

The WS700 composite/discrete water samplers come with a 2-gallon polyethylene sample bottle for collecting composite samples, a peristaltic sampling pump, a circuit board controller, and a rechargeable gel cell battery. Also provided is a sample pickup hose and a battery charger. Everything you need is provided for a successful wastewater management or environmental monitoring program.

Low Power
The composite/discrete water sampler's 5 AH rechargeable battery will power the sampler for several months or several sampling events.

Overflow Protection
The composite/discrete water sampler's sample bottle is equipped with a float switch that automatically turns off the peristalticsampling pump if the water bottle becomes full.

Sample Size
The user can adjust the composite/discrete water sampler's sample size to one of 15 composite sample sizes from 50ml to 2 liters plus a full bottle discrete setting and the composite/discrete water sampler's sample interval to one of 15 time settings from 5 min. to 12 hours plus an external trigger mode setting for flow proportional sampling.

Flow Proportional Sampling
An external pulse-type flow meter can control the water sample interval for true flow proportional sampling. The Open Channel Flow Monitor has a flow-proportional output signal for triggering the WS700 composite/discrete water samplers. If you already have a flow meter but it has a 4-20mA output, please look at the related products section of the Composite/Discrete Water Samplers Options&Prices section.Composite/Discrete Water Samplers Specifications

Operating Temperature: 0 to +70C
Size of unit: 22"H X 17"W X 9"DWeight: 20lb (Shipping Weight 22lb)Materials:
Enclosure: Expanded UV protected PVC
Bottle: 2.5 gallon Polyethylene
Pickup Hose: 15' reinforced PVC 1/4" ID polyethylene flexible tubing section with intake strainerPump Tubing: Norprene 1/4" ID, 7/16" ODSample Pump:
Flow Rate: 1000 ml per minute at a 4 foot head
Type: Peristaltic
Maximum Lift: 20 feet

Battery: Rechargeable 5 AH Gel Cell
Battery Life: 1 hour, continuous pumping under load
Standby: 3 months while still retaining enough power to run the pump to capacity

StartDelay: 16 time settings from 0 to 12 hours
Composite Interval: 15 time settings from 5 min. to 12 hours plus an External Trigger mode setting
Sample Size: 15 composite sample sizes from 50ml to 2 liters plus a Full Bottle discrete setting (Approximate sizes at 4 foot head)

External Trigger Input: 250mS minimum pulse width
Switch closure or 4-24VDC
Pulse Output: 5VDC one-second pulse
1000ohm output impedance
Bottle Switch Input: Switch closure Input
Floating read switch in bottle

Rain and Water Sensors: Optional moisture sensors or switch closure inputs
Internal Fuse: 10A Slow-Blow

Part Number
WS700 Composite/Discrete Water Sampler
Includes the following parts: a rugged, rainproof, lockable carrying enclosure, two gallon polyethylene sample bottle for composite sample, one peristaltic sampling pump, a control panel enclosed logic timer/controller, one 15' reinforced PVCsample pickup hose with removable debris strainer, a 5 AH rechargeable gel cell battery, and a battery charger.